User's Manual

1. Camera can’t Power On:
Use the original car cig charger that come with box, check the car cig charger LED
indicator is on; Check the Power USB connector been plugged into the dash cam
USB port. Or if use the power hardware kit, check the B+ and ACC wiring are
correct, and make sure that the car is in ignition state.
2. The dash cam recorder cannot record, or the video has
dropped frames or freezes
：
① Before use, format the SD card via setting menu from APP.
② Check the SD card status, a high-speed SD card or above C10 is required for
this device. The low-speed card might cause the system slow or malfunction of the
dash camera.
3. After connecting the recorder Wi-Fi, there is no display
from the APP：
① The permission requirements when opening the app for the first time must be
agreed, otherwise the app cannot be used normally, and it needs to be uninstalled
and reinstalled to obtain the permission again.
② Check the SSID name of the Wi-Fi that connected, should be initial with letters
"AX2V_CarDV_xxxx", otherwise, disconnect the WIFI and reconnect to the correct
WIFI SSID.
③ Ensure that the smartphone does not automatically cut off the WIFI of the
recorder.
<<< Common Troubleshooting >>>