User Manual

ASSEMBLY INSTRUCTIONS
1. Assemble SF-101 Microphone Isolation Shield (A)
and its components according to its Manual.
2. Screw the Double Heavy-Duty Clamps (C)
on the back of the Microphone Isolation Shield (A).
* Use the Allen Wrench (D) provided to tighten screws.
3. Slide the Speaker Stand (E) up into the
Double Heavy-Duty Clamps (C) and securely
tighten the clamps on. The back should look like
example 1-1.
®
SF 101 kit
)




A
C
E
1-1 2-2
4. Securely clamp tight Pop Filter
(B) on the Speaker Stand (E) just
below the Microphone Isolation
Shield (A). See 2-2.
5. Speaker Stand (E) has a
non-shifting locking pin (3-3) for
secure positioning and adjustment.
* Adjustable height from 42”- 74”
with a load capacity of up to 88 lbs.
3-3
Questions? Visit us at
.com