User Manual

ManualsBrandsAXA AXCESSABLES ManualsDolliesAxcessAbles Dolly Folding Platform/Hand Truck/ Cart/Moving Dolly with Telescoping Frame 2.9ft to 4.6ft, 700LB Capacity. 365 Degree Turning Radius. for Warehouse, Transport, Delivery

EXPANDABLE FRAME A/V

PRODUCTION HANDCART DOLLY

DOLLY

FALL 2020

EXPANDABLE

FRAME

N HAND

ART D

LLY

California Prop 65 Warning

This product contains chemicals, including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

Summary of content (4 pages)

PAGE 1
® ® DOLLY EXPANDABLE FRAME A/V PRODUCTION HANDCART DOLLY FALL 2020 California Prop 65 Warning This product contains chemicals, including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
PAGE 2
p2 THANK YOU FOR PURCHASING ANOTHER HIGH QUALITY AXCESSABLES PRODUCT. PLEASE FOLLOW THESE PRODUCT INSTRUCTIONS AND SAFETY TIPS TO ENSURE YEARS OF USE AND SAFE PRACTICES WHEN USING THIS PRODUCT. rear handle front handle quick view parts & features ..... handle locking foot lever #1 13.5” handle locking foot lever #2 locking pin wing screw unlock lock solid all-metal construction n 2.75” 9.
PAGE 3
p3 STEPS MUST BE FOLLOWED IN THIS SEQUENCE TO PROPERLY OPEN/RAISE AND CLOSE/FOLD THE DOLLY HANDLES how to raise dolly handles from folded/closed position ..... raise front handle first Simply raise the Front Handle first and check 1 that it firmly locks into position. 2 Raise Rear Handle until it locks into position. *Double check that both handles have securely locked into position before loading and moving the dolly.
PAGE 4
p4 how to expand/retract dolly payload area frame extends additional two feet to accommodate more of your equipment! ..... a a b a loosen screws on both sides of the frame & extend. lock spot is located under the middle bar of the main frame Fig. 3 TO EXPAND DOLLY ● Loosen the two Wing Screws. a (see Fig. 1) Fig. 1 ● Pull out until the Locking Pin b firmly “clicks” into hole (see Fig. 2) ● Tighten Wing Screws. b make sure locking button snaps securely on extension. ..............................