User Manual

ANY QUESTIONS? VISIT US AT WWW.AXCESSABLES.COM FOR CUSTOMER SUPPORT
a
a
b
lock spot is located
under the middle bar
of the main frame
frame extends
additional two feet
to accommodate more
of your equipment!
regular payload
how to
expand/retract
dolly payload area
.....
TO EXPAND DOLLY
● Loosen the two Wing Screws. (see Fig. 1)
● Pull out until the Locking Pin firmly “clicks” into hole (see Fig. 2)
● Tighten Wing Screws.
TO RETRACT DOLLY
● Loosen the two Wing Screws. (see Fig. 1)
● Push IN the Locking Pin and then pull the Front
and Rear frames of the dolly together. (See Fig. 3)
● Tighten Wing Screws.
a
a
b
a
loosen screws
on both sides
of the frame
& extend.
Fig. 1
b
make sure
locking button
snaps securely
on extension.
Fig. 2
Fig. 3
........................................................................
b
IMPORTANT
Be sure to tighten Wing Screws
to keep payload area securely
in place when DOLLY is in this
smaller payload configuration.
regular and
heavy-duty
configurations
.....
© AxcessAbles 2020
SAFETY INSTRUCTIONS
● Always lock front caster wheels when not in motion, and during loading and unloading.
● Always make sure that the Locking Pin has clicked into place in its’ locking hole before loading dolly with equipment.
● Always tighten Wing Screws after any adjustments to payload capacities.
extended
payload
p4