User Manual

ADCP-XX-XXX • November 2000 • Section 5: WMTS Operation
Page 5-10
 2000, ADC Telecommunications, Inc.
3.7.1 Access Limits
Each operator can have different access permission, as listed in Table 5-3.
Table 5-3. Access Limits
ACCESS LEVEL CAPABILITIES
Supervisor Full access to all SNMPc NT capabilities. The
administrator always has this access level.
You must have supervisor permission to modify any
operators attributes.
Operator Read-only access to database files. No access to
privileged information (e.g., set community names, user
information). Read/write access to devices using SNMP
operations.
Service Ability to add objects to the map and change polling
attributes. Permission to send private RPC messages.
Only the remote poller user can have this access level.
Observer Read-only access to database files. No access to
privileged information. Read-only (Get) access to
devices using SNMP operations.
3.7.2 Defining Operators
Use the User Profiles option in the Config menu to add, configure or delete an operator.