Installation Manual

Reader Installation
© 1999, AXCESS
TM
Inc. 750.001.003
Revised June 1999
25
Installation of an FTT Reader System
Introduction
The AXCESS Free Topology Transceiver (FTT) Reader System is
for network applications involving multiple, interconnected Readers
(Figure 9).
Jp1
Jp3 Jp5 Jp6
Jp4
FTT
Serial Gateway
Reader 1
Reader 2
Serial Data
Twisted Pair
LonWorks Network
Sensitive Trigger
Relay
Computer
+ Trigger
Common Ground
NC (normally closed) or NO (normally open)
FTT
Door Strike
Device
Common Ground
NC (normally closed) or NO (normally open)
Sensitive Trigger
Relay
+ Trigger
To more Readers
FTT
FTT Motherboard
FTT Motherboard
24V
Ground
Door Strike
24V
Ground
Device
Figure 9 FTT Reader system
The FTT Reader System has at least one of each of the following:
• An FTT Reader that can connect to several external devices and
to other FTT Readers.
• A computer to drive the system. The computer collects data from
the tags. The computer may also send commands via the
Readers to other devices that control doors, send alarms, turn on
lights, etc.