User's Manual

Contents
Tag Mounting
Because of the low frequency used for transmission, NuDot Tags
can be mounted in a variety of positions on assets and vehicles
without the signal being blocked. Personnel can carry Tags on
chains, clips, pockets or purses.
Mounting Tags to Assets
Required Materials
• LED Test Tag
• Mounting materials for asset Tags – cyanoacrylate (ProCement
from ProTec Technology, Super Glue), MEK (methyl ethyl
ketone), double-sided tape, or a Mylar enclosure that has a
sticky back
• Latex gloves if you are using one of the above adhesives
• Washable marker or pencil
IMPORTANT! Before using either cyanoacrylate or MEK, consult the
vendor’s instructions and the compound’s Material Safety Data
Sheet. For all assets, mount the Asset Tag with the flat side attached
to the asset.
Tower
Power Supply
Tag
Recommended
Tag Locations
Faceplate
Desktop
Recommended
Tag Locations
Power Supply
Tag
Faceplate
Figure 2: Asset Tag Desktop Locations
LCD Screen
Laptop Base
Asset Tag
Back of LCD Screen
Recommended Tag
Locations and Orientations
LED Tag
Figure 3: Asset Tag Laptop Locations