User's Manual

Configuring and Installing the Activator
28 750.001.004 R0033 © 2001 AXCESS Inc.
Changing the Activator ID Number
If your ActiveTag system is using Version 5 Tags, type one of the
numbers in Table 1 followed by an exclamation point (!). The number
will be accepted at the Activator’s ID number.
3 34 70 103
13 44 72 105
14 47 75 106
21 52 80 113
22 55 83 114
24 57 93 124
27 58 94 127 – default ID
33 69 100
Table 1 Valid Activator IDs
If your system is using Version 6 Tags, type any number between 1
and 250 for the Activator ID. For example, if you type:
113!
113!113!
113!
The Activator will respond with
ID = 113
ID = 113ID = 113
ID = 113
Method 2: Hardware
When set with jumpers, the Activator ID is a binary number
represented by jumpers. A 1 is represented by a jumper on a header
and a 0 is represented by an absence of a jumper.
ID Jumpers ID Jumpers
3 0 0 0 0 0 0 1 1 70 0 1 0 0 0 1 1 0
13 0 0 0 0 1 1 0 1 72 0 1 0 0 1 0 0 0
14 0 0 0 0 1 1 1 0 75 0 1 0 0 1 0 1 1
21 0 0 0 1 0 1 0 1 80 0 1 0 1 0 0 0 0
22 0 0 0 1 0 1 1 0 83 0 1 0 1 0 0 1 1
24 0 0 0 1 1 0 0 0 93 0 1 0 1 1 1 0 1
27 0 0 0 1 1 0 1 1 94 0 1 0 1 1 1 1 0
33 0 0 1 0 0 0 0 1 100 0 1 1 0 0 1 0 0
34 0 0 1 0 0 0 1 0 103 0 1 1 0 0 1 1 1
44 0 0 1 0 1 1 0 0 105 0 1 1 0 1 0 0 1
47 0 0 1 0 1 1 1 1 106 0 1 1 0 1 0 1 0
52 0 0 1 1 0 1 0 0 113 0 1 1 1 0 0 0 1
55 0 0 1 1 0 1 1 1 114 0 1 1 1 0 0 1 0
57 0 0 1 1 1 0 1 0 124 0 1 1 1 1 1 0 0
58 0 1 0 0 0 1 0 1 127 0 1 1 1 1 1 1 1
69 0 1 0 0 0 1 1 0
Table 2 Jumper settings for Activator IDs