User's Manual

ManualsBrandsAxcess International ManualsElectronicsAT132-AT Activator

Table Of Contents

General Installation Information
- Safety
- Information Flags
- Hand Tools, Equipment and Materials
  - Required
  - Recommended
A
ActiveTag System Overview
- ActiveTag System Components
- Tags
- Activator
- Receiver
- Transmit Antennas
  - Types of Transmit Antennas
System Configuration Basics
- Introduction
- Application Types
  - Vehicle
    - System Placement Guidelines
  - Personnel and/or Asset
    - System Placement Guidelines
- Multiple Activator Applications
- Installation Tips
- Basic Installation Steps
C
Configuring and Installing the Activator
- Introduction
  - Activator IDs
- Supplying Power
- Setting the Activator ID
  - Method 1: Serial Commands
  - Method 2: Hardware
- Other Serial Port Commands
- Activator Installation
  - Required Materials
  - Mounting the Activator
- Resizing the Activation Field
  - Adjusting the Field
C
Configuring the Receiver
- Introduction
- Connecting Power to the Receiver
- Configuring the Receiver
- Receiver Responses
- Setting up a Wiegand System
  - Responding to Activator IDs
  - Alarm Output
- Setting up a Serial or LAN System
- Setting the Receiver ID
- Enabling TTL outputs (Logic Control)
- Diagnostic Mode
  - _
  - Turning off Diagnostic Mode
- Viewing Configuration Settings
C
Configuring the NIU
- Introduction
- Connecting the NIU to the PC
- Setting up the Serial Port
- Connecting the Receiver and the NIU
- Modifying the NIU Configuration
I
Installing the Receiver
- Connecting to a Wiegand Control Panel
  - Wiegand Output
- Connecting to a Serial Device
  - Serial Output
- Wiring TTL Outputs to TTL outputs
- Connecting to the NIU and the Network
- Mounting the Receiver
  - Mounting the Receiving Antenna Separately
Road Loop Antenna Installation
- Introduction
- Required Materials
- Prerequisite Tasks
- Road Loop Layout & Connecting to the Activator
- Installing the Road Loop Antenna (Frequently contracted)
B
Bar Antenna Installation
- Introduction
- Prerequisite Tasks
- Installation Considerations
- Installing the Bar Antenna
P
Picture Frame Antenna Installation
- Introduction
- Prerequisite Tasks
- Installing the Picture Frame Antenna
T
Tags
- Types of Tags
- Tag Labeling
- The LED Test Tag
- Mounting Tags to Assets
- Mounting Tags to Vehicles
- Tags and Personnel
  - Required Materials
  - Operating Panic Tags
Appendix A: Troubleshooting the System
- _
A
Appendix B: Coaxial Cable
A
Appendix C: Advanced Wiegand Configuration
- _
  - Setting the Time between Outputs
  - Changing the Duplicate Tag Buffer
Appendix D: Receiver Commands
Appendix E: Specifications
- _
I
Index

Configuring the Receiver

Where

R R R

R R RR R R

R R R

is the Receiver ID,

A A A

A A AA A A

A A A

is the Activator ID,

F F F

F F FF F F

F F F

the facility code,

T T T T T

T T T T TT T T T T

T T T T T

is the Tag ID number,

CRCR

is Carriage

Return, and

LFLF

is Line Feed.

To make the Receiver backwards compatible with AXCESS NT132

systems, type:

36c

36c36c

36c

The serial output will now have the short format:

A A A F F F T T T T T LF CR

A A A F F F T T T T T LF CRA A A F F F T T T T T LF CR

A A A F F F T T T T T LF CR

To return to the long format out (default), type:

21c

Optimizing Serial Output

The speed at which the Receiver processes data can be maximized

by eliminating the extra steps required to output Wiegand data and

check TTL output control settings.

To optimize serial output, turn off the Receiver’s Wiegand output by

typing:

29c

29c29c

29c

To restore Wiegand output (default), type

15c

If your installation does not require TTL outputs, it can be further

optimized by disabling TTL outputs with the following command:

35c

35c35c

35c

Note: This command will also disable Wiegand ouputs.

To restore TTL output operations, type:

20c

Note: When the Network Receiver is sending data via the serial port,

the LED labeled DATA TX will alternately flash from red to green.

Observing this LED on the front of the unit will help in verifying proper

operation of a Network Receiver.