Installation Guide

Mounting the Network Receiver

• The Receiver should be within 35 feet of an activated Tag

• The receiving antenna should not be blocked by metal or brick

The following diagrams show various mounting positions for the

Network Receiver. Two mounting holes on the bottom of the Receiver

can be used to mount the it to a wall (Figure 18). Double-sided tape

can also be used to mount the Receiver. The receiving antenna can

be placed through acoustic tile in a ceiling (Figure 19).

L Connector

Mount with

tape

Figure 18 Receiver wall mount positions

IMPORTANT! If an L connector is used, the receiving antenna must be

positioned away from the Network Receiver.

Preferred

mounting position

2nd choice

Figure 19 Receiver ceiling mount positions

Mounting the Receiving Antenna Separately

In some installations, such as vehicle applications, it may be

necessary to mount the receiving antenna separately from the

Network Receiver. Detaching the receiving antenna allows you

to place the antenna closer to activated Tags and to place the

Receiver in a more advantageous location, such as an

electrical closet or inside a waterproof enclosure.





