Installation Guide

Network Receiver

AXCESS Inc. provides a ground plane bracket for such

applications (Figure 20).

Drip Loop

Ground Plane Bracket

Figure 20 Receiving antenna ground plane

IMPORTANT! The receiving antenna should be no more than 25

feet by cable run from the Receiver.

To mount the receiving antenna separately

1. Cut the coaxial cable with sufficient length to connect the

receiving antenna to the Receiver. The cable length

should not exceed 25 feet.

2. Attach BNC connectors to both ends of the cable.

3. Remove the receiving antenna from the Receiver.

4. Connect one end of the cable to the receiving antenna

connector on the Receiver.

5. Connect the receiving antenna to the top of the ground

plane bracket and the other end of the cable to the

bottom of the connector.

NOTE If installed outdoors, ensure that there is a drip-loop in

the RG-58 cable below the receiving antenna.

6. Position the receiving antenna and ground plane as close

as possible to the area where tags are activated.

7. The ground plane can be mounted in a variety of

positions on walls or poles using the mounting holes and

hardware provided.





