User`s manual

Installing under OS/400
AX3000 - User's Manual 133
b) Advanced Settings
Within the Prt5250 box select "Enhanced Parameters" and press <Space>. The
following dialog box is displayed:
These parameters are:
- TCP Port: OS/400 telnet port. Generally 23.
- TERM Value: terminal capabilities. Default value is IBM-3477-FC.
- Auto-Connection: if this parameter is set to 'yes', the connection will be
automatically established when the AX3000 is powered. Otherwise, the
user can press <Alt><Fx> to establish the connection.
- Auto-Reconnection: if this parameter is set to 'yes', a new connection is
automatically established after a disconnection. Otherwise, the user can
press <Alt><Fx> to establish a new connection.
- Enhanced Parameters: see Appendix A.10.3.
- Transparent Mode: this mode allows ASCII data to be sent to printer
session port. The possible values are:
- No
- Yes: data can be encoded in decimal and hexadecimal notations
- Yes, hexa: data is encoded only in hexadecimal notation.
- On/Off ASCII Sequence: start and stop transparent mode sequence. For
more information see Chapter 6.2.5.
c) Using the Printer
The Prt5250 service is a client service. This means that each Prt5250 auxiliary
port opens a connection to the AS/400 when the AX3000 is powered-on. From
the AS/400, a printer is available once the associated Prt5250 connection is
established.