User`s manual

Installing under Windows
156 AX3000 - User's Manual
This chapter covers AX3000 installation under Windows
This chapter describes the operation of the AX3000 in a Windows environment.
For more general information about the AX3000 (network and session settings,
instructions for users, etc) please refer to the previous chapters.
The connection to a Windows server can be done either via:
- Microsoft's RDP protocol. See Chapter 8.1.
- Citrix's ICA protocol. Two connection types are available:
- To a published server or application. See Chapter 8.3.
- Through a local desktop (like Nfuse, WEB Interface and Program
Neighborhood). See Chapter 8.4.
These protocols enable a remote graphical display on the AX3000. The image
is constructed, maintained and updated within the Windows server (NT4 TSE,
2000 Server and 2003 Server).
8.1 - RDP SCREEN SESSION
The embedded protocol is RDP5. The following table shows key features
available for each operating system:
Number of
bits/pixel
Printer
Redirection
COM Port
Redirection
NT4-TSE 8 bpp (256 colours) No No
Windows 2000 8 bpp (256 colours) Yes Yes
Windows 2003
15 bpp (32768 colours)
16 bpp (65536 colours)
Yes Yes