User`s manual

Installing under Windows

176 AX3000 - User's Manual

d) Remapping a COM port

Terminal COM ports must be remapped to server COM ports. The remapping

commands are "change client" or "net use". These commands may be issued

from a command prompt from the terminal’s Citrix session.

Example: the Windows COM4 port is remapped to the terminal COM1 port

net use com4: \\client\com1:

change client com4: com1:

Note: this remapped resource is only for the terminal. In this example COM4 is

not seen by other users.

☺: How to set-up a user account to automatically launch a "net use" command.

- Create a shareable directory called Netlogon.

- In this directory create a file called "myscript.bat".

- Enter the 'net use' command line as required in this file.

- Edit the user account properties by selecting the 'profile' tab and set the

"Logon script" to read the "myscript.bat" file.

For more details see Windows help on Netlogon.

8.2.7 - Bandwidth

Within the 'Session Profile' box, select 'Bandwidth' and press <Space>. The

following box is displayed:

These parameters are:

- Compress: this allows Windows to send compressed data. This

optimises bandwidth but in some cases can decrease overall

performance.