User`s manual

Installing under Windows
188 AX3000 - User's Manual
8.4.3 - Idle Session Limit
When the AX3000 is powered off without logging out, the current TCP/IP
connections remain active on the server side (see Chapter 8.5.3).
To avoid these 'phantom' sessions, an automatic clean-up mechanism is
offered. This shuts down the idle sessions after a certain time.
The idle session disconnection can be set either at the user settings level (see
the User Properties dialog box) or at a global level. For this second method,
within the 'RDP-Tcp (or ICA-Tcp) Properties' box, click on the 'Sessions' tab.
The following information is displayed:
Enable the 'Override user settings' check box and set the required delay for the
'Idle session limit' parameter.
Warning: an idle session can be either a 'phantom' session or real used
session on which no action has been perform for a certain time (for example