User`s manual

Installing under Windows
AX3000 - User's Manual 199
various support or administration purposes.
The following diagram clarifies the concept of remote control with RDP protocol
(the same principles apply for ICA connections)
:
The procedure to take control of a remote
terminal is as follows:
- Open an administrator RDP connection
to the Windows server
- Launch ‘Terminal Services Manager’
from ‘Administrative Tools’.
- All connected terminals are listed –
select target for remote control.
- Activate "remote control" by right mouse
click.
After the terminal’s user has given
authorisation the remote control connection is
established. The administrator "sees" the
same screen as the terminal user.
8.8.2 - The Axel Remote Management Software (AxRM)
A Windows administration utility (AxRM or Axel Remote Management) is
available free on the Axel Web site (http://www.axel.com
).
The AxRM software allows system administrators to manage and configure
Axel TCP/IP products remotely over a network. The remote Axel device is
selected by its IP address or network name. (The software can also assign an
IP address to a newly installed terminal that has not had an IP address set)
AxRM is an abbreviation for Axel Remote Management software.
AxRM is used for:
- Obtaining hardware and firmware revision levels
- Obtaining Ethernet and serial line configuration