User`s manual

Initial Power-On
10 AX3000 - User's Manual
This chapter describes the 'Quick Set-Up' feature and the 'Auto-Configuration'
service.
When the terminal is switched on up for the very first time two configuration
methods are available:
- Quick Set-Up: a wizard allows the terminal to be set-up in few seconds
for typical use.
- Auto-Configuration: used in conjunction with AxRM, this function allows
the terminal to automatically receive new firmware and/or a configuration.
2.1 - QUICK SET-UP
This feature is automatically run when the AX3000 is powered up for the first
time or can be accessed at any time from the interactive set-up, by pressing
Ctrl-Alt-Esc (menu [Configuration]-[Quick set-up]).
The quick set-up is designed for a typical simple environment of:
- One server
- An optional router
- All sessions set identically
- An optional printer.
Note: After the ’Quick set-up’ is run all other parameters within the terminal are
reset to their factory default values.
The ‘quick set-up’ guides the user through a setup menu in an intuitive manner.