User`s manual

Appendix
AX3000 - User's Manual 271
A.10.2 - General Level: Advanced Parameters
This chapter describes special AX3000 operating parameters. Usually the
default values are suitable.
All these general parameters are located in a specific dialog box in menu
[Configuration]-[Advanced]-[Tuning]:
a) The 'TCP/IP Interface Enabled' Parameter
This parameter allows or disables the AX3000 network interface. For example
the network interface is not needed when the terminal is used in serial mode.
Note: a new value takes immediately effect.
b) The 'IP Addr. Set by Ping' Parameter
This parameter allows or disables the AX3000 IP Address to be set by a ping
command. (See Appendix A.7.)
Note: a new value takes immediately effect.