User`s manual

Interactive Set-Up
26 AX3000 - User's Manual
This chapter describes AX3000 installation using the interactive set-up
procedure.
The following can be used to enter the AX3000 interactive set-up:
- Using <Ctrl><Alt><Esc> from the terminal
- Using Telnet from another terminal/PC. (See Chapter 10.2)
Note: the set-up can be password-protected, in which case the password must
be entered to access the quick set-up dialog box. For more information, see
Chapter 3.7.1.
Note: the following keystrokes are available in the set-up (for more information
see Appendix A.1):
- <Arrows>: moving selection within menus or dialog boxes
- <Enter>: validating a value or a button
- <Esc>: cancels current field same as selecting 'cancel' button
- <Space>: open a list of options
- <Tab>: short cut to buttons at the bottom of the dialog box
3.1 - SETTING NETWORK ENVIRONMENT
This chapter covers the AX3000 configuration for DHCP or/and DNS protocols.
The topics described are:
- AX3000 interface (DHCP, IP address and netmask),
- DNS protocol,
- Server table,
- Router table.
Note: more information and explanations are given in the following appendices: