User`s manual

Interactive Set-Up
AX3000 - User's Manual 37
b) Time Redirection
The terminal negotiates its own local time zone. This allows different ‘local
times’ to be displayed on terminals in different geographic regions?
Note: the time zone redirection function must be enabled on the Windows 2003
server. See Chapter 8.4.6.
The time zone parameters are:
- Time Zone GMT: positive or negative offset from GMT.
- Time Zone Name: a non-empty character string (Greenwich by default).
- Daylight Saving: enabling daylight saving function.
- Daylight Settings: press <Space> to customize daylight settings. The
following dialog box is displayed:
Enter the following parameters for each transition time:
- Transition Day: day number, day and month. (For example: Last
Sunday of March for daylight time.)
- Transition Hour: enter the hour without minute. (For example: 2 is
02:00.)
c) Keyboard Nationality
When the nationality of the keyboard is not listed by the terminal setup, a
country specific Microsoft keyboard code can be specified. This code is used
when an RDP/ICA session is established and allows any keyboard nationality to
be negotiated and supported by the terminal.
Note: The country code is only applicable after
the connection is established –
so is not available at the terminal setup level.