User`s manual

Interactive Set-Up
44 AX3000 - User's Manual
3.4.6 - Connecting a Printer
a) Logical Port Attachment
When a USB printer is connected for the first time to the Axel terminal a logical
port is associated. Four logical ports are available: Usb1, Usb2, Usb3 and
Usb4.
The associated logical ports are listed in the menu [Configuration]-[Ports]-
[USB Logical Ports]. To get information of a USB printer, select its logical port
and press <Enter>. For example:
This association is maintained even if the printer is powered off, disconnected
or connected to the other USB port.
Releasing a logical port is a manual operation (see Chapter below 'Releasing a
Logical Port').
b) Setting-Up
The USB printer set-up procedure is the same as a serial or parallel printer.
For more information, see Chapter 3.5.2 and the following.
c) Releasing a Logical Port
A logical port must be manually released. This operation can be performed only
when the USB device is no longer connected.