User`s manual

Interactive Set-Up
46 AX3000 - User's Manual
b) Configuration
A logical USB port is allocated to the USB-RS232 adaptor. (See attaching and
releasing operations in the Chapter 3.4.6). For example:
This USB logical port allows the adaptor to be configured: line parameters
(baud rate, format...), service and RDP/ICA redirection. For more information
see Chapter 3.5.1.
3.4.8 - Connecting a Touch Screen
A USB touch screen may be seen by the terminal:
- Either as a pointer device
- Or as an USB-RS232 adaptor. In this case a logical USB port is
automatically created (see Chapter 3.4.7).
In both cases, to set-up the touch screen, select the menu [Configuration]-
[General]-[Miscellaneous]. For more information see Chapter 3.2.4.
3.4.9 - Connecting a Mass Storage Device
Note: only available with the firmware option MSC.