User`s manual

Interactive Set-Up
AX3000 - User's Manual 59
b) Using the rsh Command to Print
The embedded rcmd service allows printing with the rsh command (or rcmd
command, according to the operating system used).
To set the rcmd service on the required auxiliary port, select the rcmd service
from the [Configuration]-[Ports]-[xxx]-[yyy] dialog box. Then enter the name
of the associated printer port.
For more information about the rsh command, refer to Chapter 5.3.3.
c) Using printd Legacy Service
The printd service is a legacy printer service used in conjunction with the UNIX
axconf utility. It is supported to maintain backward compatibility, but lpd or tty
services should always be used in preference.
3.6 - MULTI-SESSION AND STATUS LINE
The multi-session dialog box controls the following AX3000 parameters:
- Hot keys to flip between sessions,
- The TCP/IP status line.
Select the [Configuration]-[Sessions]-[Multi-session] dialog box: