Installation guide

Quick Installation
Installation Guide - Models 65B 7
3 - QUICK INSTALLATION
This chapter describes the quick set-up procedure for the TCP/IP Platine
Terminal.
The following command sequence is used to enter the AX3000 Set-Up:
All the AX3000 set-up parameters (network environment, session settings and
auxiliary port settings) can be adjusted through this set-up.
For more information, refer to the guide: TCP/IP AX3000 - User's Manual.
But, for a fast and reliable installation, the AX3000 provides a quick set-up
function. This quick set-up function is dedicated to a typical environment:
- only one host,
- an optional router,
- all the virtual terminals have the same settings,
- a lpd or a Prt5250 printer is available.
To enter the quick set-up, select [Configuration]→[Quick Set-up] and press
<CR>. A warning message is displayed, press <CR> to continue.