Installation guide

Quick Installation
8 Installation Guide - Models 65B
The quick set-up dialog box is displayed:
Note: this box is automatically called when the AX3000 is powered up for the
first time.
Quick set-up parameters:
- Keyboard: keyboard nationality.
- Number of sessions: maximum number of sessions. These sessions
are automatically associated with the host described above.
- Configuration: virtual terminal settings. This choice is selected from a
list.
- Enable DHCP: two possible values:
- yes: the DHCP protocol is run when the set-up is exited. The
DHCP function is automatically set to get both the AX3000 IP
address and other DHCP options (netmask, default router, etc).
- no: parameters are manually entered (in addition, AX3000 Name
(FQDN) is not accessible).
- AX3000 IP address: it must be entered if DHCP is disabled.
- Default router: optional router IP address.
- 1st DNS Server IP Address: optional DNS server IP address
- AX3000 Name (FQDN): this optional parameter (see appendix A.5)
allows an AX3000 to be identified by this name if both a DHCP server
and a Dynamic DNS server are available.
- Host Name: if the IP address of a host is not given, this name will be
resolved by DNS (if a DNS server is given).