Installation guide

Quick Installation
Installation Guide - Models 65B 9
- Host IP address: if this field is left blank, DNS will be used to resolved
the hostname.
- Enable: Configuring printers attached to AX3000. If ‘Pre-defined
Configuration’ is set to 5250 and a hostname is defined, PRT5250 (telnet
printing) is automatically selected. If not LPD is the default printing
system. This setting can easily be changed through interactive set-up.
- Printer Name (accessible only if "Enable" is set): this is the printer name
at the operating system level.
- Manufacturer Type and Model (accessible only with Prt5250): printer
type and model.
After confirmation, all the AX3000 set-up parameters are updated.