User`s guide

Remote Administration
________________________________________________________________
98 TCP/IP AXEL Platine Terminal
# Firmware: FK3.BV1.1a/TCP.UK.9701.a #
#########################################################
#
# RESET_CMOS
Note: the
RESET_CMOS
command allows all the Set-Up parameters (except the
AX3000 IP address) to be reset. When the configuration file is obtained from an
AX3000, this
RESET_CMOS
command is displayed as a comment.
Ethernet Parameters
#ethernet_ipaddr=192.168.1.241 (address IP format)
ethernet_noise=low (low | high)
Note: When a configuration file is obtained from an AX3000, the
ethernet_ipaddr
parameter is commented out (in order to use this file for
configuring other AXEL Terminals).
TCP/IP Parameters
tcp_host1_name=vangogh (character string, 15 char max.)
tcp_host1_ip=192.168.1.252 (address IP format)
tcp_host1_telnetp=23 (numeric)
tcp_host2_name=picasso (character string, 15 char max.)
tcp_host2_ip=192.168.1.248 (address IP format)
tcp_host2_telnetp=23 (numeric)
tcp_host3_name=pablo (character string, 15 char max.)
tcp_host3_ip=192.168.1.249 (address IP format)
tcp_host3_telnetp=23 (numeric)
tcp_host4_name=vangogh (character string, 15 char max.)
tcp_host4_ip=192.168.1.250 (address IP format)
tcp_host4_telnetp=23 (numeric)
#tcp_host5_name= (character string, 15 char max.)
#tcp_host5_ip= (address IP format)
#tcp_host5_telnetp= (numeric)
#tcp_host6_name= (character string, 15 char max.)
#tcp_host6_ip= (address IP format)
#tcp_host6_telnetp= (numeric)
#tcp_host7_name= (character string, 15 char max.)
#tcp_host7_ip= (address IP format)