User`s guide

Remote Administration
________________________________________________________________
100 TCP/IP AXEL Platine Terminal
address and the
tcp_router%_mask
parameter is an optional network
mask used to reach the target network.
- The default router is encoded by
tcp_router%_ip
set to
0.0.0.0
,
cp_router%_target
set to
default
and
tcp_router%_mask
set to
0.0.0.0
.
AUX1 and AUX2 Parameters
In the following section of the file, for ease of reading the auxiliary port number
(1 or 2) has been represented by the '%' character. In a real configuration file,
the parameters for each auxiliary port would, of course, be listed.
aux%_service=none (none | rtty | printd | lpd
rcmd | rtelnet | tty)
aux%_service_name=aux1 (character string, 8 char max.)
aux%_service_num=2048 (number)
aux%_filter_nl=no (yes | no)
aux%_associate_host=vangogh (character string, 8 char max.)
aux%_associate_term=ansi (character string, 8 char max.)
aux%_associate_autoconn=yes (yes | no)
aux%_associate_reconn=yes (yes | no)
aux%_use=bi-directional (printer | bi-directional)
aux%_speed=38400 (300 | 600 | 1200 | 2400 | 4800
9600 | 19200 | 38400 | 57600
115200)
aux%_data (7-1-none | 7-1-odd | 7-1-even
8-1-none | 8-1-odd | 8-1-even)
aux%_tx_hdsk=dtr (none | xon-xoff | xpc | dtr)
aux%_rx_hdsk=dtr (none | xon-xoff | xpc | dtr)
aux%_detect=none (none | cts)
Note: Depending on the associated service (
aux%_service
), some
parameters can be inactive. They are unmarked in the following table and
commented out in the configuration file:
Available Services
aux%... parameter none printd rtty lpd rcmd rtelnet tty
service_name
service_num