User`s guide

Setting the Configuration
________________________________________________________________
TCP/IP AXEL Platine Terminal 19
A 'High' threshold, sets an AX3000's high reception sensitivity. Then, in case of
an unexpected attenuation of signals (due to a low quality wiring, a too long
cable, etc) this parameter allows the Platine to receive and process the network
frames normally.
Note: it is recommended that this parameter be modified with caution, because
the more sensitive the AX3000 is to data reception, the more sensitive it is to
external interference.
This new value is used after the AX3000 is power-cycled (switched off and on
again).
2.4.5 - 'tcp port' Option
A TCP/IP session (telnet, print server, terminal server) is identified by two
parameters:
- AX3000 IP address (used in all sessions),
- TCP Port (different for each session).
For example: session 1 (192.168.1.241 / 1024)
session 2 (192.168.1.241 / 1025)
The TCP port number associated with a session can either be a predefined or a
random value. This choice is made using the 'tcp port' option:
- random (default): when the AX3000 is switched on, a random x value is
computed. The 14 TCP ports needed by the AX3000 are from x to x+13.
- fixed: The 14 TCP ports needed by the AX3000 are from 1024 to 1037.
This new value will be set after the AX3000 is power-cycled.