User`s manual

Installing under OS/400
96 TCP/IP AX3000 User's Manual
related profile parameters (username, password, etc.). The Auto-Signon box is
accessed by selecting the "Login Script" parameter within the
[Configuration]→[Terminal]→[Session X] box (see Chapter 6.1.2):
This box allows a value to be entered for each parameter displayed within an
AS/400 Signon Screen:
- Username
- Password (available only if 'Username' is not empty): press <Space>
to enter the password.
- Program/Procedure (available only if 'Username' is not empty).
- Menu (available only if 'Username' is not empty).
- Current Library (available only if 'Username' is not empty).
Note: if the AX3000 is too old , the "Login Script" may not be supported (when
the NVRAM size is 2Kb).
Important: the auto-signon function must be allowed at the OS/400 level. To
enable it set the QRMTSIGN variable to *VERIFY (command CFGTCP).
6.1.5 - Setting-Up the Mouse
The mouse can be either connected to the PS/2 port (if this port exists) or to the
serial AUX2 port.
The mouse declaration depends on the mouse port:
- PS/2 port: select [Configuration]→[Terminal]→[General]. Within this
box, set 'Mouse' to 'PS/2'.