User`s manual

Installing under OS/390
TCP/IP AX3000 User's Manual 115
7.1.1 - Setting a Session
To set a profile session, enter the AX3000 Set-Up and select the
[Configuration]→[Terminal]→[Session X] menu (where X is the session
number to be configured). The following box is displayed:
These parameters are:
- Connection Type: select telnet
- Host: press <Space> to select the host from a list
- TCP Port: enter 23.
- Auto-Connection
- Auto-Reconnection
- Configuration: press <Space> to select '3270'
- TERM Value: IBM-3278-2-E
- Terminal Name (DEVNAME): this optional name identifies the terminal
connection at the OS/390 level.
- General Parameters: pressing <Space> displays a dialog box which lets
certain emulation parameters be changed. See next chapter.
- Overscan: select the overscan colour
- Session Label: session identification located on the TCP/IP status line.
Save and exit the set-up. The AX3000 is ready for use.