User`s manual

Installing under Windows
TCP/IP AX3000 User's Manual 141
available. (See Chapter 8.1.1, Sub-Chapter c). The same printer can be
handled with both LPD and RDP redirection protocols.
The main characteristics of these protocols are:
LPD Protocol:
- The printer must be added to the Windows spooler by the administrator.
- The printer name is static.
- The printer is available when the terminal is powered-on and can be
accessed by any user.
- The printer dataflow is not compressed.
- The display and printer data flows are multiplexed by TCP/IP.
RDP Protocol:
- The printer is automatically created when the RDP session is
established.
- The printer name is static: "terminal name / printer name / session X" (the
session number can varied).
- The printer is only available when the RDP session is established. This
printer is the user default printer. This printer is not "seen" by other users.
- The printer dataflow can be compressed.
- The display and printer data flows are multiplexed by RDP.
The following applies only with LPD printer configuration.
8.3.1 - Setting-Up the AX3000
To set the LPD service on the terminal port, select the [Configuration]→[Ports
aux.]→[xxx] dialog and enter the following parameters:
- Associated Service: select lpd.
- Net Service Parameters: press <Space> to access the following dialog
box: