User`s manual

Installing under Windows
142 TCP/IP AX3000 User's Manual
- Printer Port Name: this is the port identifier. Normally the same
name is used for the printer at the operating system level.
- NL=CR+NL Filter: The line feed character 0x0A can be mapped to
carriage return + line feed 0x0D 0x0A,
Note: if the auxiliary port used for printing is a serial port, set the 'Printer'
operating mode.
8.3.2 - Setting-Up the Windows Server
To add a printer, select the 'Add printer' icon (in the 'Start'¤'Settings'¤'Printers'
menu).
Within the displayed dialog box, select 'Local printer' (Disable the Plug-And-
Play detection). Click on 'Next'.
Within the next dialog box, select 'Create a new port' and select 'LPR Port'.
Click on 'Next'.
Note: if 'LPR Port' is not available, you need to install 'Print Services for Unix'
from the Windows CDrom.
Finally within the next dialog box, enter the two parameters requested:
- name or address of the server providing LPD: AX3000 IP address
- name of printer or print queue of that server: this is the 'Printer Port
Name' AX3000 Set-Up parameter (see Chapter 2.2).
When this printer is added, all print jobs sent to this printer are automatically
redirected to the AX3000.
8.4 - PUBLISHING APPLICATIONS
A Windows TSE application publishing utility (AxMenu or Axel RDP Menu) is
available for free on the Axel Web site (http://www.axel.com
).
RDP gives the user access to a standard Windows desktop, but this may
provide too much freedom for users to access the Windows operating system or