User`s manual

Tools and Statistics
146 TCP/IP AX3000 User's Manual
This chapter describes the embedded AX3000 tools.
The AX3000 provides the following features:
- the ping command
- connection management
- a statistics environment
Note: these functions are accessed from the AX3000 interactive set-up.
9.1 - THE PING COMMAND
The ping command is used to check for the presence of a live TPC/IP device.
Select the [Diagnostics]→[Ping] dialog from the AX3000 set-up, then enter the
IP address or the name of the TCP/IP peripheral.
After a few seconds, the status of the TCP/IP device will be displayed (alive or
not alive).
9.2 - CONNECTION MANAGEMENT
During AX3000 installation, connection failures can be caused by wrong
settings.