User`s manual

Tools and Statistics
TCP/IP AX3000 User's Manual 149
9.3.1 - Ethernet Statistics
The following information is displayed:
"Output" and "Input" are the number of correct frames (transmitted and
received)
The error section gives the type and the number of errors. (When everything is
fine, the 8 parameters of this section are set to 0.)
"Hardware Interrupts" gives information about the network chip.
"Unknown Frame Type" is the number of non-TCP frames received. (Example
IPX frames.)
"Link" (only available with models 75/75E) is the Ethernet Link status. (Useful
when the auto-sense mode is enabled.)