User`s manual

Remote Set-Up
154 TCP/IP AX3000 User's Manual
This chapter covers remote set-up of the TCP/IP AX3000.
10.1 - OVERVIEW
This feature enables an AX3000 to be set up remotely, using the a remote
administration command. A text file (provided as an argument to the remote
administration command) defines the value of some or all set-up parameters. It
can either be:
- created with a text editor or
- obtained by a remote administration command on an AX3000 already
set-up.
The remote administration command depends on the operating system. Refer
to the Chapter 5.5 (Unix/Linux), the Chapter 6.4 (OS/400) or the Chapter 7.3
(OS/390).
The remote administration command parameters are:
- the name or the IP address of the AX3000,
- a command: one of the 3 following keywords:
- setup_send : set-up an AX3000,
- setup_get : get an AX3000 configuration,
- ax_reboot
: reset an AX3000.
Note: to access an AX3000 with the rsh command, the IP address of the
AX3000 must already have been set