User`s manual

Remote Set-Up
160 TCP/IP AX3000 User's Manual
Solution: check the host configuration.
ERR 213: too many sessions or pages. Page number set to 1.
Command: setup_send
Cause: eight screens are supported by the AX3000. This resource is
shared by sessions and pages (i.e. multi_nbsession ∗
multi_nbpage ≤ max. session).
Consequence: to get a consistent configuration, the multi_nbpage
parameter is set to one.
Solution: check the number of sessions and pages.
ERR 214: Associate host not found. Association reset.
Command: setup_send
Cause: a session is associated with a non existing host.
Consequence: to get a consistent configuration, this session is not
associated with a host.
Solution: check the host configuration.
ERR 215: s%_udk_xxx and following: no place to store udk value.
Command: setup_send
Cause: not enough memory to store a group of programmable keys.
Consequence: the default values of these keys are restored.
ERR 216: Too many RDP sessions. Only the first one is available.
Command: setup_send
Cause: more than one RDP session are set (only one is allowed).
Consequence: only the first RDP session is kept.
Solution: remove the extra RDP sessions.
ERR 217: RDP and VNC resolution conflict. VNC session is set to
800x600.
Command: setup_send
Cause: when the RDP session is set to 800x600, the VNC
session(s) can't be set to 1024x768.
Consequence: the VNC session(s) are set to 800x600.
Solution: modify the VNC sessions.