User`s manual

Appendix
176 TCP/IP AX3000 User's Manual
The following appendices give information about:
A.1 - Using the AX3000 interactive set-up
A.2 - Network overview (Ethernet address, IP address and routers)
A.3 - Adding an LPD printer within an operating system
A.4 - DHCP protocol
A.5 - DNS protocol
A.6 - Remote set-up configuration file format
A.7 - Setting the IP address by a ping command
A.8 - Administration command list
A.9 - Selecting TCP/IP or serial mode
A.10 - Going further...
A.11 - Default factory set-up and quick set-up
A.12 - Hardware and firmware information
A.1 - USING THE INTERACTIVE SET-UP
A.1.1 - Enter the Set-Up
The following command sequence is used to enter AX3000 Set-Up:
Note: the set-up can be password-protected, in which case the password must
be entered to access the quick set-up dialog box. For more information, see
Chapter 3.6.