User`s manual

First Boot-Up and Quick Set-Up
10 TCP/IP AX3000 User's Manual
This chapter gives the information needed to use the 'Quick Set-Up' feature.
2.1 - OVERVIEW
The AX3000 terminal provides a quick set-up feature which allows a fast and
reliable installation. This quick set-up feature:
- is automatically called when the AX3000 is powered up for the first time,
- can be accessed at any time from the interactive set-up.
The quick set-up is dedicated to a typical environment, comprising:
- only one host
- an optional router
- virtual terminals, all set identically
- an optional printer.
Note: following a quick set-up, the AX3000 settings are those of the default
factory set-up, modified by the quick set-up parameters (see Appendix A.11).
Parameters required in the quick set-up box depend on the AX3000 firmware.
Two cases are distinguished:
- standard firmware
- DNS/DHCP firmware