User`s manual

Interactive Set-Up
16 TCP/IP AX3000 User's Manual
This chapter describes AX3000 installation using the interactive set-up
procedure.
Use the following keystroke combination to enter the interactive set-up:
Note: the set-up can be password-protected, in which case the password must
be entered to access the quick set-up dialog box. For more information, see
Chapter 3.7.
Appendix A.1 explains how to use the interactive set-up.
3.1 - SETTING A BASIC NETWORK ENVIRONMENT
This chapter deals with the AX3000 setting without the use of DHCP and DNS
protocols. The topics are described:
- AX3000 interface (IP address and netmask),
- host table,
- router table.
Setting-up an AX3000 with DHCP and/or DNS protocol is described in Chapter
3.2.
Note: for more information and explanations about network operations (IP
addresses, net masks, routers, etc) see Appendix A.2.