User`s manual

Interactive Set-Up
TCP/IP AX3000 User's Manual 17
3.1.1 - AX3000 Interface
Select [Configuration]→[TCP/IP]→[Interface] and enter the following
parameters:
- IP Address: AX3000 identifier (a.b.c.d),
- Net Mask: a net mask handles sub-nets. The net mask is set to the
default value of the IP address class (no sub-net).
Note for models 75/75E: the AX3000 10/100 network interface is set by default
to 'Auto-sense'. To change this value, consult the Appendix A.10.11.
3.1.2 - Host Management
A host is a TCP/IP machine (UNIX, AS/400, etc) to which the AX3000 can open
connections (telnet and tty)
A host must be identified with two parameters:
- a name: an alphanumeric character string beginning with a letter,
- an IP address.
Select the [Configuration]→[TCP/IP]→[Hosts] dialog to configure the host
table: