User`s manual

Interactive Set-Up
TCP/IP AX3000 User's Manual 39
An lpd printer can be configured with 3 parameters:
- an IP address (the AX3000’s IP address),
- an identifier for the auxiliary port (character string),
- an optional filter to pre-process the file before printing (but generally this
processing is done at the operating system level).
To set the LPD service on an auxiliary port, select the [Configuration]→[Ports
aux.]→[xxx] dialog and enter the following parameters:
- Associated Service: select lpd.
- Net Service Parameters: press <Space> to access the following dialog
box:
- Printer Port Name: this is the port identifier. Sometimes the same
name is used for the printer at the operating system level.
- NL=CR+NL Filter: The line feed character 0x0A can be mapped to
carriage return + line feed 0x0D 0x0A,
Note: if the auxiliary port used for printing is a serial port, set the 'Printer'
operating mode.
For more information about lpd printers, see Appendix A.3.
3.5.4 - Connecting a Serial Terminal
Two serial terminals can be attached to the AX3000’s serial ports. The
terminals communicate with the target host(s) using the AX3000’s embedded
telnet service.