User`s manual

Installing under UNIX/LINUX
TCP/IP AX3000 User's Manual 59
Select the [Configuration]→[Terminal]→[Session X] dialog box to set the
pre-defined configuration. Then select the 'Predefined Configuration'
parameter and press <Space>. The following table shows the recommended,
pre-defined configurations for the various operating systems:
Operating Systems Pre-defined Configuration
UNIX SCO 3.2v2 UNIX SCO 3.2.2
UNIX SCO 3.2v4 UNIX SCO 3.2.4
Open Server SCO SCO OPENSERVER
Xenix SCO XENIX SCO
IBM AIX 3.x ANSI RS6000
IBM AIX 4.x HFT
Unix Ware 7 UNIXWARE 7
LINUX LINUX
UNIX Interactive ANSI INTERACTIVE
SUN - Solaris 2.x ANSI SVR4
Others ANSI, VT220 or WYSE 60
Note: selecting a pre-defined configuration updates the value of the TERM
environment variable. However, this value can then be modified further (see
Chapter 3.4.2).
5.1.4 - Customising the Emulation
Various emulation parameters can be modified but generally the default values
are the most suitable.
To customise the emulation, enter the AX3000 Set-Up and select the session
profile ([Configuration]→[Terminal]→[Session X] menu). Two groups of
parameters control emulation settings:
- General Parameters: emulation behaviour,
- User-defined Keys: associating character strings to keyboard keys.