User`s manual

Installing under UNIX/LINUX
TCP/IP AX3000 User's Manual 81
In this example, axname is the name of the AX3000 (refer to /etc/hosts file)
and parallel is the Printer Port Name of the AX3000 auxiliary port.
5.3.3 - Using Transparent Mode
One of the three auxiliary ports should be selected as the default printer port
which will be controlled by escape sequences.
Select the [Configuration]→[Terminal]→[General] dialog and set the 'default
printer port'.
This default port can only be used if no network service (lpd, tty, etc) is currently
using it.
Note: the default printer port is also used to perform local printing of the screen
using the <Prt Scr> key.
5.4 - THE AXEL TTY SERVER
5.4.1 - Overview
The TTY server emulates a multi i/o board connection over a TCP/IP
connection. For example using this service a remote printer attached to an Axel
terminal is accessed by Unix as a local printer via /dev/ttyp4, which may be
preferable over using LPD in certain circumstances. Similarly the Axel terminal
can be accessed via a predetermined and fixed /dev/ttyp, which in certain cases
may be preferable over using telnet.
The AXEL tty server is a UNIX daemon (axttyd). The axttyd daemon must be
used with the AX3000 tty or rtty network service.