User's Manual

VHF Headstation & In-Line Amplifiers
User Handbook
Handbook Nō.-50-127201FCC Issue No:-A
Date:-14/06/2005
Page:-
39 of 45
5.7 RS232 Setup
The RS232 controller/monitor should not need setting up as the specified configuration
with suitable firmware for the application will have been fully tested with the whole of the
system before it leaves the factory. The RS232 PCB’s functions are transparent to the
system if the RS232 board is powered but not utilised.
Further information on the controller board’s setup and remote capabilities is available in
the RS232 Controller/Monitor Handbook, AFL Nō. 17-005801HBKM.