User Manual

AXELL CSR 3604-3304 UHF REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
30 DOC PN 3633B-UM Rev. 2.1 © Axell Wireless Ltd
6 Setup
This section describes the available setup procedures: required and optional according to
your system installation.
6.1 Overview of the Setup Procedures
The following setup procedures are required to operate the repeater:
 Assigning the repeater a recognizable name – for easy identification of the source of
events
 Defining channels
 Setting the clock and time – used to timestamp events
 Additional setup procedures – according to your system installation and requirements:
 Configuring external alarms
 IP address – for connection to the Ethernet network
 SNMP support
 TCP/IP
 Modem setup
6.2 Assigning Repeater a Recognizable Name
The CSR is automatically assigned an ID by the AEM. In addition, it is recommended to
assign each repeater a recognizable name that will identify the location, site name, etc.
To assign the Tag
NOTE: The repeater tag can be locked in order to prevent being accidentally modified from the AEM
side (unlock by clicking on the button).
1. In the Home screen, under the General section next to Tag, click the Edit option.
2. Assign the Repeater a name (up to 30 characters) that indicates the location of the
Repeater.
3. Click OK.
TAG