User Manual

AXELL CSR 3604-3304 UHF REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
40 DOC PN 3633B-UM Rev. 2.1 © Axell Wireless Ltd
7 Administration and Monitoring
7.1 User Accounts
The CSR comes pre-configured with default usernames and passwords in the various
administration levels.
The password for the Axell user name can be modified via the Web GUI. Passwords for
other user names can be modified via the Command Line Interface (CLI) or Axell Shell. See
the Common Commands and Attributes document for detailed commands and syntax or
click on the Help button at the top right of the Web-GUI screen.
7.1.1 Default User Accounts
User
Name
Default
Password
Details
Axell
AxellPasswd
Default user name. Can be modified via the WEB
GUI.
omcuname
iwnkhoob
Axell Element Manager (AEM) user account. This
account will not generate VLI, LGO or CLR alarms.
sysadmin
AxellAdmin4050
This is the system administration password which is
used for firmware upgrades and user administration.
Escalation to this level is achieved by issuing command
SYSADMIN from the user prompt.
useradmin
UseradminPwd23
This account contains user administration privileges.
Escalation to this level is achieved by issuing command
USERADMIN from the user prompt.
NOTE: It is strongly recommended to change the default user names and passwords
immediately at commissioning. This is done by using the command ACT PASSWORD.
Please refer to the User Administration section in Common Commands and Attributes
document for detailed syntax.
7.1.2 User Access Levels
In this generation of the system, standard users can be promoted to login via the Web
Interface, inheriting the Read-Write or Read-Only access to this interface.
There are five different access levels:
Access Level
Default User Levels
Read-Only
axell, omcuname, useradmin, sysadmin
Read-Write
axell, omcuname, useradmin, sysadmin
Web
Axell
User Administrator
omcuname, useradmin, sysadmin
System Administrator
omcuname, sysadmin
Note: New users added to the system have read-only access.
Users may be promoted to read-write and/or web access using the ACT USERPROMOTE
command. See Common Commands and Attributes document for details on promoting
users.
NOTE: Users omcuname, sysadmin and useradmin cannot be promoted to Web Access
due to security reasons.