User Manual

AXELL CSR 3604-3304 UHF REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
48 DOC PN 3633B-UM Rev. 2.1 © Axell Wireless Ltd
8.2 Module LEDs
8.2.1 Control Module LEDs
The Control Module has four LEDs which provide information on
the repeater and modem status and if someone is logged on to
the repeater.
Blue LED - Login
Quick flash
Control Module switched on, someone logged in locally and/or
remotely
Off
(except for a quick flash every 10th
second)
Control Module switched on, no one logged in
Off
(permanent)
Control Module switched OFF
Red LED - Status
Quick flash
Control Module switched on, one or more errors/alarms detected
Off (except for a quick flash every
10th second)
Control Module switched on, status OK
Off (permanent)
Control Module switched off
Green LED – Modem Power
On
Modem Power is on
Off
Modem Power is off
Green LED – Modem Status
On
Depending on type of call:
Voice call: Connected to remote party
Data call: Connected to remote party or exchange of parameters
while setting up or disconnecting a call
Flashing
(irregular)
Indicates GPSR data transfer. When a GPRS transfer is in progress
the LED goes on within 1 second after data packets were
exchanged. Flash duration in approximately 0.5s.
75ms on/75ms off/75ms on/3s off
One or more GPRS contexts activated
75ms on/3s off
Logged to network (monitoring control channels and user
interactions). No call in progress
600ms on/600ms off
No SIM card inserted, or no PIN entered, or network search in
progress, or ongoing user authentications, or network login in
progress
Off
Modem is off
8.2.2 Power Supply LEDs
This section provides a detailed description of the LEDs and examples of faults.
LOGIN
STATUS
MDM PWR
MDM STATUS