User Manual

AXELL CSR 3604-3304 UHF REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
© Axell Wireless Ltd DOC PN 3633B-UM Rev. 2.1 15
4.4 Bracket Assembly
The Repeater is supplied with four wall mounting brackets; when the Repeater is mounted
on these brackets adequate ventilation is provided between the Repeater and the wall to
which it is fixed.
Fix mounting brackets to Repeater with the supplied screws.
4-1. Bracket Assembly Examples
4.5 Wallmount Procedure
4.5.1 Requirements
The Repeater wall mount brackets assembly should be fixed to a solid wall (these include
brickwork, blockwork, and concrete.);
Due to the weight of the Repeater, it is NOT recommended to fix to a hollow wall.
Figure 4-2. M6 Rawlbolt – recommended for wallmount.
IMPORTANT!
Always check that there are no pipes or cables hidden in the wall beneath
the area to be drilled. Various pipe and cable detectors are available for
this type of inspection.
To provide secure fixing to a solid wall, the most common method is drilling and plugging.
The size of fixing is dependent on the item to be fixed and the nature of the wall, The
Repeater should be fixed with mild steel, M6 (50mm to 75mm) Rawl bolts or similar.