User Manual

AXELL CSR 3604-3304 UHF REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
24 DOC PN 3633B-UM Rev. 2.1 © Axell Wireless Ltd
5 Login and GUI Navigation
This section describes how to open a session to the repeater, and provides a brief
description of the WEB GUI and describes the initial setup procedures.
5.1 Opening a Local Web Session to the Repeater
5.1.1 Connect the Repeater to the Computer
Connect computer to the Repeater Ethernet connection
Using the supplied Ethernet cable, connect either to the repeater EXTERNAL ETH port (if
an external ETH port is available on one of the side panels), or to the INTERNAL Ethernet
port (located internally at the side of the Controller).
The following figure shows an internal ETH connection – to the side of the controller.
Figure 5-1. Connection to an internal Ethernet port (if external port is not available)